|
|
Characteristics of gels used in the fluids engineering
Hudák, Igor ; Habán, Vladimír (referee) ; Fialová, Simona (advisor)
Not only in common life, but also in the technical area the usage of gels presents some kind of standard. Gels offer a unique possibility of usage in numerous areas. The gel structure itself is a very interesting material however it’s hard to specify its characteristics. The gel system presents a huge macromolecular network which enables to observe its different characteristics in comparison to other materials. In some circumstances gels act almost as conventional materials, in other circumstances, however, they act significantly otherwise. Therefore this bachelor thesis deals with a description and summarization of single characteristics of gels in chosen branches of the mechanical engineering industry where gels are used on a daily basis, such as sealant of pipeline systems, wires or electronic components. The thesis also describes principles of gel formation, with the emphasis to building of gel substance and with respect to its mechanical and physical features. In the end, the thesis gives a comparison of chosen characteristics of gels that are used as sealants and gels that are used for encapsulation of electrical set.
|
|
|
Diffusion processes in modified humic gels
Grunt, Jakub ; Sedláček, Petr (referee) ; Klučáková, Martina (advisor)
This bachelor thesis presents a study on diffusion of cupric ions in humic acid gels. A total of four types of samples were made during a modified preparation of gels. Humic acids were dissolved either in sodium hydroxide or in the solution of sodium triphosphate. Subsequently, hydrochloric acid and magnesium chlorid were used for "precipitation" of the gels. Gained samples differed particularly in the nature of interactions forming their gel structures. All the samples were subjected to diffusion experiments. Two different methods – constant-source diffusion and immediate planar source diffusion – were used to assign the diffusion coefficients. Both these methods were based on monitoring how the diffusion profiles of cupric ions in gels develop in time and on assigning the overall diffusion flow. The aim of the thesis was to assess the impact of gel preparation procedure and resultant structure on diffusion coefficients of cupric ions and their transport attributes in gels in general. Two different methods of diffusion inquiry were chosen particularly to assess the impact of cupric ion concentration on the diffusion coefficient.
|
|
|
Transport of drugs in humic hydrogels
Shalabodova, Kseniia ; Krouská, Jitka (referee) ; Klučáková, Martina (advisor)
Presented bachelor’s thesis focuses on the study of diffusion of drug in humic hydrogels. The aim of the work was to appraise the effect of the presence of the humic substances in the transport capacity of the diffusing compound. The main idea of experimental part was to compare the drug’s transport in samples of humic acid gels with the transport in agarose hydrogels samples. For this study diffusion couple method was used which was based on monitoring the development of diffusion profiles of drug in gels with the passage of time. As a diffusing medium sulfapyridine belonging to sulfonamide antibiotics class was used.
|
|
|
Transport of metal ions in humic hydrogels
Hegr, Martin ; Smilek, Jiří (referee) ; Klučáková, Martina (advisor)
This diploma thesis is focused on the study of diffusion of metal ions in hydrogel of humic acid. The objective of this thesis was to investigate the effect of the concentration of metal ions supply source and duration of diffusion on transport through the gel using method of diffusion couple. Cupric, nickel and cobalt ions were esed like the diffusion medium. All these ions were selected thanks to their high affinity for the humic acids and because they are ideal to investigate the diffusion through the humic gel. Chloride salts of these metals, namely CuCl2, NiCl2 and CoCl2, were used like supply sources. Three different concentrations of each solution were compared, specifically 0,05M, 0,1M and 1M, and also were three different durations of diffusion, specifically 10 hours, 1 day and 3 days. Metal ions were compared with each other in order to determine which one has the best transport properties through the humic hydrogel. The data, necessary for calculation, were obtained by UV-VIS spectrophotometry. Diffusion coefficients and duffusive flux of individual metal ions were determined from measured data.
|
|
|
Complexes of aminoclays and polyelectrolytes
Málková, Ivana ; Pekař, Miloslav (referee) ; Mravec, Filip (advisor)
This thesis deals with the preparation of aminoclay and its products resulting from the interaction of aminoclay with natural polyelectrolyte. The theoretical part deals with the study of aminoclay and selected polyeletrolytes, which were used in the experimental part of the thesis. Potassium pectate, sodium alginate and sodium hyaluronate were chosen as polyelectrolytes. The aim was to let these two groups of compounds interact and to observe the formation of an aminoclay polyelectrolyte complex, taking form of a gel or a precipitate when appropriate concentrations were chosen. The resulting products were characterized in appearance and pH of the products was measured.
|
|
|
Optimizing the determination of distribution of surfactant at phase separation in polymer-surfactant system
Sátorová, Kateřina ; Pekař, Miloslav (referee) ; Mravec, Filip (advisor)
This diploma thesis is focused on the determination of distribution a surfactant at phase separation in polymer-surfactant system. Sodium hyaluronate of three molecular weights was chosen as a polymer, CTAB was used as a surfactant. The experiments were performed in an environment of 0,15 M NaCl. The measurement of the CTAB concentration in samples was based on the formation of coloured complexes of CTAB and picric acid in chloroform. UV-VIS spectroscopy was used for the detection of these complexes. The content of CTAB was determined in four gels of different composition (2% Hya + 200 mM CTAB, 2 % Hya + 50 mM CTAB, 0,5 % Hya + 200 mM CTAB, 0,5 % Hya + 50 mM CTAB). All gels were gradually washed five times with 0,15 M NaCl. The content of CTAB was determined for newly prepared gels and for gels after 2 and 4 months since the preparation. Initial concentrations of CTAB and hyaluronan have greater influence on the distribution of CTAB after phase separation, than the molecular weight of hyaluronan. The content of CTAB in newly prepared gels and after 4 months since preparation is very similar and demonstrates the stability of the system.
|
|
|
Utilization of flow-coulometry in study of transport metal ions in humic gels
Kalina, Michal ; Pabst, Willi (referee) ; Klučáková, Martina (advisor)
This diploma thesis deals with the study of non-stationary diffusion of cupric ions in humic gels. The main objective of the work was the optimalization of conditions for using the electrochemical analyzer EcaFlow 150 GLP for the study of diffusion experiments. Next part was focused on reaching of constant concentration profiles of cupric ions in humic gel. Last aim of the study was the bond strength between cupric ions and humic acids. Diffusion was characterized by the values of the diffusion flux and cupric ions concentration profiles in humic gel. The data necessary for calculation were obtained by the electrochemical analyses of the extracts of each slice after diffusion on the EcaFlow 150 GLP. It has been proved that after application of several adjustment is this method suitable for the study of diffusion experiments. By using of different extraction agents was obtained the fractionalization of cupric ions according to the bond strength to humic acids.
|
|
|
Compensation of geometric distortion of electrophoretic gel image
Dvořáček, Tomáš ; Vítek, Martin (referee) ; Škutková, Helena (advisor)
This master thesis is engaged in problematics of creation and compensation of geometric distortions in 1D agarose electrophoresis. This master thesis analyze the problematics of cause of these distortions and summarize the theory needed for compensation of these distortions. Based on acquired theory and created electrophoretic phantoms, the master thesis contains several suggestions for compensation of incurred distortions. These suggestions are recreated into functions, which are connected into a functional user interface for gel image analysis and geometric distortions compensation.
|
|
|
Diffusion of cupric ions in humic hydrogels
Grunt, Jakub ; Pabst, Willi (referee) ; Klučáková, Martina (advisor)
Presented diploma thesis focuses on the study of diffusion of cupric ions in humic acid hydrogels. A total of eight different hydrogels were prepared by dissolving the humic acids with sodium hydroxide and sodium triphosphate. For the purpose of precipitation and cross linking, hydrochloric acid and chlorides of magnesium, calcium and iron were used during a modified preparation of gels. Different gel-forming interactions were achieved by modifying the preparation of hydrogel systems. The aim of the thesis was to assess the effect of gel preparation procedure on the transport properties of the gels. Therefore, diffusion coeficients were determined for all samples. Two different methods - constant-source diffusion and instantaneous planar source diffusion - were used to assign the diffusion coefficients. Methods differ in source concentrations of cupric ions and are suitable for assessing the impact of the concentration on the diffusion coefficient. Both these methods were based on monitoring temporal evolution of diffusion profiles of cupric ions and on assigning the overall diffusion flow. Copper ions were elected as diffusing medium because of their high affinity and strong binding to humic acids. Measurements show that gels prepared using polyphosphate allow slightly faster diffusion of cupric ions and that the constant-source method provides higher diffusion coefficients in comparison to instantaneous planar source method.
|
|
|
Influence of selected active compounds for properties of gel and emulsion cosmetics
Gardoňová, Lenka ; Pekař, Miloslav (referee) ; Zemanová, Jana (advisor)
This master‘s thesis studies problems of chosen active substances in cosmetic emulsions and gels. There is their main characteristics – distribution and properties of cosmetic emulsions and gels, preparation of the active substances, effects on the skin and conditions, which could them influence. In experimental part, preparation of gels and emulsions bases was described which were than enriched by active substances - evening primrose oil, hemp oil, Salvia officinalis extract, Symphytum officinale extract and sea salt. Properties of these cosmetic gels and emulsions bases with the addition of active substances depend on temperature and method of storage, amount of light exposure, method of preparation and another conditions. Action of these factors can cause changes of the stability, thereby the cosmetics effects on the skin can be lost. On the bases of performed rheology measurements (oscillation and flow measurements), pH measurements and sensory analysis were determined, if the properties of examined samples were changed. The measurement was performed in the certain time intervals and the properties were evaluated like at laboratory temperature 23±2 °C, so after exposure to temperature regime 37 °C in thermoregulator. On the basis of performed measurements, there was determined, that gel base with addition of Symphytum officinale extract had the most stability properties.
|
guest ::
